Searchin section
For example, network security system
Products by CategoryManufacturersTechnologiesCompanies for SalePatentingStartups
Homepage /  Products by Category /  Energy

Motor-vehicle Gas Refueling Compressor Station AGNKS-60

Product's Rating

Model number

АГНКС-60

Place of origin

Ukraine

Description

Motor-vehicle Gas Refueling Compressor Station AGNKS-60 created on the basis of JSC PEC "Sumygazmash" facilities is designed for refueling of cars, buses, special transport and farming vehicles with natural gas (methane) compressed to 20 MPa (200 atmospheres).

AGNKS allows:
- use the natural gas in capacity of motor fuel;
- gain independence from petroleum supplies and high prices for petroleum and diesel fuel.

Using gas as motor fuel allows to cut fuel and lubricant costs by 2-2.5 time, increase the engine motor-life by 40%, decrease the volume of poisonous exhaust substances discharged in the air by several times, increase the life time of motor lubricants by 1.5 times.
Unlike the large-size AGNKSs, AGNKS-60 can be installed in the city boundaries or at the fleet. Gas is consumed from city communication pipelines with overpressure 0.05-0.3 Mpa (0.5-3 atmospheres) which corresponds to gas pipeline features of all settlements of CIS countries and Ukraine throughout the year.

Mounting of the station includes installation on beforehand prepared plate, connection to the gas pipeline and electricity network. Water is not used for the technological purposes. The compressor is air cooled. Heating is not required in the technological blocks. AGNKS-60 works in Automatic and Semi-automatic modes. Automatic system controls the station parameters, automatic turn off and turn on.

The modular equipment in use allows to AGNKS-60 to do 75 to 300 refuels for a day. Block-container structure allows it to be transported by all means of transportation, exploitation on all outdoor plates in climates zones with temperature ranging -30 0С to +45 0С. AGNKS-60 is block-container type with automatic control system.

Technical specification of AGNKS
Gas compressed - Natural gas according to the State Standard 5542-87
Type of Piston Compressor - W-type, triplex, five-stage, cross-head
Inlet overpressure, МPа (kgf/сm2) - 0,05 -0,2 (0,5-2)
Max station productivity, calculated for standard conditions (State Standard 2939), normal m3/hour - 275
Consumed power, kWt per hour - 81
Outlet pressure of gas, filled to the vehicle, MPa (кgf/сm2) - 20,0 (200)
Max gas pressure (for refueling Mobile Gas Refuellers), МPа - 22 (220)
Number of vehicles, refueled for 24 hours, counting one vehicle consumes 55м3 for one refuel and the station is 80% loaded - 100
Consumption of lubricant, кg/hour - 0,05
Cooling of cylinders, and the compressed gas at each stage - air
Overall dimensions of the compressor block, mm
- Length - 4500
- Width - 2550
- Height - 2700
Station Weight in the scope of supply, kg - 13000

Completeness of block type AGNKS units: compressor block, block of accumulators, block of inlet cocks, dispenser, refuel ramp, control system, inter-block pipeline system, spare parts.

Contact manufacturer

Message sent successfully!
Message sent fail! Please, try again later!